| Customization: | Available |
|---|---|
| Standard: | Ansib16.9/B16.5,En10253-4,DIN2605,GOST 17375 |
| Selling Units: | Single Item |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ASTM A105 Weld Neck, Slip-on, Socket Welding, Blind, Plate, Threaded Carbon Steel Flange Pipe Fittings
| FORGED FLANGE |
| 1) ANSI B16.5, ASME B16.47 FLANGE |
| Size range: 1/2" to 80" DN15 to DN2000 |
| Design: welding neck, slip on, blind, socket welding, threaded, lap-joint |
| Pressure: 150#, 300#, 600#,900#,1500#, 2500# |
| Wall thickness for welding neck flange: STD, SCH40, SCH80, SCH160. SCHXXS |
| Material: carbon steel A105, stainless steel 304/304L, 316/316L |
| Coating: black paint, yellow transparent paint, cold and hot dip galvanize |
| Package: seaworthy plywooden case, wooden pallet |
| 2) EN1092-1 FLANGE |
| Size range: DN15 to DN2000 |
| Design: type01 plate flange, type02 loose flange, type05 blind flange, type11 welding necking |
| type12 slip on flange, type 13 threaded flange |
| Pressure: PN6, PN10, PN16, PN25, PN40, PN64, PN100 |
| Material: carbon steel C22.8, S235, S235JR, P235GH, stainless steel: 304/304L, 316/316L |
| Coating: black paint, yellow transparent paint, cold and hot dip galvanize |
| Package: sea worthy plywooden case, wooden pallet |
| 3) DIN FLANGE |
| Size range: DN15 to DN2000 |
| Design: slip on flange DIN2573,2576,2502,2503, 2543,2545 |
| welding neck falnge DIN2631, 2632,2633,2634,2635 |
| blind flange DIN 2527 PN6, PN10, PN16, PN25, PN40 |
| threaded falnge DIN2565,2566,2567,2567 |
| loose flange DIN 2641,2642,2656,2673 |
| Material: carbon steel ST37.2, stainless steel 1.4301, 1.4404 |
| 4) GOST FLANGE |
| Size range: DN15 to DN 2000 |
| Design : plate falnge 12820-80, welding neck flange 12821-80 |
| Pressure: PN6, PN10, PN16, PN25, PN40 |
| Material: carbon steel CT-20, stainless steel 304/304L, 316/316L |
| Coating: rust-proof oil, cold and hot galvanize |
| Package: sea worthy plywooden case, wooden pallet |
| 5) JIS B2220 FALNGE |
| Size ragne : 15A to 2000A |
| Design: SOP, BIND, SOH, |
| Puressure: 1K, 2K, 5K, 10K, 16K, 20K, 30K, 40K |
| Material: carbon steel SS400, stainless steel SUS304, SUS316 |
| Coating : rust-proof oil, cold and hot galvanize |
|
Packing: sea worthy plywooden case, wooden pallet |
| Welding neck |
| 1, Preferred for high-pressure, subzero or elevated temperature |
| 2, Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion |
| 3, Easily radiographed and provides excellent stress distribution |
| Slip-on |
| 1, Not normally used in high-stress applications due to low hub and weld attachment |
| 2, Silps over outside of pipe |
| 3, Inside of flange welded at hub and end of pipe |
| Lap joint |
| 1, Used where bolt alignment or access for cleaning is required |
| 2, Similar to slip-on flange when used with lap joint stub end |
| 3, Radius at intersection of flange face and bore to match lap joint stub end |
| Threaded |
| 1, Used where welding would would be hazardous |
| 2, Designed for low-pressure and non-cyclic applications |
| 3, Bore is threaded to match pipe thread |
| 4, Tapered to seal pipe and flanges |
| Socket welding |
| 1, For small-diameter chemical processes, hydraulic and stream distribution lines |
| 2, Similar to slip-on flange |
| 3, Counter bore matches pipe bore, allowing unrestricted flow |
| 4, Counter bore from hub side fits pipe's outer diameter - can insert pipe in socket with fillet weld at hub |
| Blind |
| 1, Used to close ends of piping |
| 2, Has no bore |
| 3, Permits access to sealed lines |
| Other flanges |
|
Orifice, Expander, Reducing, Lightweight, Studding Outlets, Long Weld Necks,Metric, Navy Drawings, Customer Drawings |
| Size: | OD: DN15- DN2000 (1/2''- 80'') |
| Type: welding neck, slip on, blind, socket welding, threaded, lap-joint | |
| Pressure: 150#, 300#, 600#,900#,1500#, 2500# | |
| Material: | carbon steel A105, C22.8, S235, S235JR, P235GH,SS400,37.2 |
| Stainless Steel 304/L,316/L,321,310S,347H,1.4301, 1.4404 | |
| ASTM A234 WP1/5/9/11/12/22/91 | |
| Duplex stainless steel: UNS31803, SAF2205, UNS32205, UNS31500 | |
| Coating: | Rust-proof oil, cold and hot galvanize |
| Packing | sea worthy plywooden case, wooden pallet |
1. who are we?
A.We are based in Hunan, China, start from 2018,sell to Southeast Asia(18.00%),South America(17.00%),Africa(17.00%),Mid East(16.00%),Oceania(9.00%),South Asia(6.00%),Northern Europe(5.00%),Southern Europe(3.00%),Eastern Europe(2.00%),Western Europe(2.00%),Eastern Asia(2.00%),Domestic Market(1.00%),North America(1.00%),Central America(1.00%). There are total about 101-200 people in our office.
2. how can we guarantee quality?
A.Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
A.carbon steel pipe,stainless steel pipe,casing and tubing,alloy steel pipe,scaffolding tube
4. why should you buy from us not from other suppliers?
A1.Strong financial support:we can handle max amount 100-500 million dollars for an order.
A2.Rich experienced marketing team/production team/after-sales team
A3.We can provide you with all the required documents when the tender is in progress.
5. Are your prices competitive?
A: for the same quality, our price is lower, for the same price, our quality is the best better.
6. What are your company's strengths?
A: Factory spot, competitive prices, excellent quality, support factory inspection, video call at any time, technical support in
24/7. Simultaneously, we have participated in many international projects.
7. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FCA,DDP,DDU;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A;
Language Spoken:English,Chinese,Spanish,Portuguese,German,French
8. What is your usual delivery time?
A: From the execution date of the PI, spot products will be delivered within 3 days, and customized products within 15 days.
Special circumstances, please communicate again. All our products have strict quality inspection before they leave the factory, to ensure that you receive the goods with excellent quality.
9.Whether to support OEM or ODM?
A: We welcome customers to cooperate with us by OEM or ODM. We have a professional technical team, can be customized according to drawings or requirements.
){kind=link}